|
Paving
Wallbarn
Plastic Paving Support Pads are used to aid
the process of laying paving
on deck surfaces. They
offer a fast, clean and easy
alternative to bedding paving
slabs down, and allow the water
to run away from the deck. They
also help to prevent the buildup
of dirt and other material between
the slabs.
They
raise the paving 17mm clear
from the deck, and separate
the paving slabs from each other,
giving a 5mm gap between slabs.
They are simply laid onto the
base structure or insulation
and the paving slabs are placed
on top with the corners are
held in position between the
lugs.
The
weight of the slabs ensures
a tight and secure fit.
Advantages of Paving Support Pads
- Correct positioning
of paving slabs and holding
them securely in place.
- Uniform spacing
between paving slabs.
- High clearance of
paving slabs from the base
structure.
- Water drainage between
slabs, and below the paving
level.
- Interlocking, allowing
stacking, for laying paving
to falls.
- Labour saving
- Paving not fixed, allowing slabs to be removed
easily
| Wallbarn
Plastic Paving Support Pads are
designed to stack on top
of each other. This
allows applicators to continue
paving on decks which are
not level, or create a much
higher gap between the deck
and the paving, since Wallbarn
Plastic Paving Support Pads
can be stacked up to five
high.This is ideal for when paving is being laid on unlevel
surfaces |
|
| Where the deck is uneven,
paving supports can be
stacked to create uniform
levels. Providing the edges are
sufficiently fixed and secured,
different numbers of
paving supports can be stacked
at each end of the slabs
to create steps. |
|
|
