MINI MEGAPADS FOR PAVING – OUR SMALLEST ADJUSTABLE PEDESTALS

MINI MEGAPADS are our special smaller height pedestals suitable for suspended paving systems. They were developed as we had received feedback from our customers who required a solution to areas where restricted and very low height thresholds existed but still minor alteration of height was still required to achieve completely flat and seamless finishes.

pa1

Wallbarn can offer fully adjustable solutions at extremely low height tolerances. Even as low as 10mm, installers can achieve precise, split millimetre accuracy in the height of the pedestal to accommodate tiny changes in the level.

In 2017 Wallbarn has launched its new ultra mini Megapad. The 10-20mm Mini Megapad has been designed for use when working with very tight spaces. The thread allows 5mm of change to the level with a 5mm extension plate which is fitted to the bottom of the pedestal.

pa2

The extension plate increases the pedestal height by 5mm so users can have a 10-15mm or a 15-20mm fully adjustable pedestal for use in these tight spaces.

pa3

Special handle grips have been incorporated into the design to help installers fit their fingers into this tight gap and can turn the pedestal to adjust the height. Adjustment can be made whilst the slab is in situ, so delays by constantly lifting the slab to change the height are avoided.

The extended handle at the side allows installers easier access for any final movements.

Wallbarn believes that the 10-20mm is the smallest fully adjustable pedestal on the market in UK.

Two alternatively designed pedestals, the Mini Megapad 22-30mm and Mini Megapad 28-37mm, are available for slightly higher clearances.

pa4

The lug fittings on the headpieces act as a straight paving guide, so all slabs will follow a uniform line. The headpieces and baseplates are both 150mm in diameter and will hold the edge of four separate slabs and give adequate support to the paving system. The stems are telescopic, so users can turn the pedestal until it “bites” to the correct height.

pa5

Using these Mini-Megapads, rather than fixed height paving pads, avoids the need to have to spend a large amount of time and effort placing shims under fixed height supports trying to gain the optimum level.

pa6

This is important since the lowest height thresholds are most commonly found around areas such as doorways and the structure-end of terraces, where pedestrian traffic is most likely to be at its heaviest so level, stable, secure paving is most critical.

td7These Mini Megapads, being so small, could present a problem to any “fat fingered” installer who might have trouble actually getting their fingers into the cavity to adjust the pedestal.

Wallbarn has a multi-function key. The curved and shaped profile at one end which can be used as a spanner / wrench type tool. It grips around the series of vertical bars between the head and base and can be used to turn the thread up and down.

Technical Data
CODE HEIGHT DIAMETER OF HEAD DIAMETER OF BASE DISTANCE BETWEEN LUGS LUG HEIGHT WEIGHT TOLERANCE UNIT OF SALE INCLUDES
SP-MEG-010 10-20mm 150mm 150mm 60mm 15mm 400kg PEDESTAL, HEADPIECE, 1 x 5mm EXTENSION PLATE
SP-MEG-022 22-30mm 150mm 150mm 60mm 15mm 400kg PEDESTAL & HEADPIECE
SP-MEG-028 28-37mm 150mm 150mm 60mm 15mm 400kg PEDESTAL & HEADPIECE

For Megapads of 35mm and higher, please see our Megapads page.

ARRESTING THE FALL OF THE ROOF DECK

For decks which have a considerable fall in the level, slope correctors can be fitted to the base plates to arrest the fall.

For the Mini Megapad 10-25mm the 3-8mm rubber acoustic shim can be loose fitted under the base to ensure the pedestal is fully vertical. of the smaller Megapad units.

td9

For the 22-30mm and 28-37mm Mini Megapad, Slope Correctors of 1%, 2% and 3% gradients are designed to clip onto the baseplates to arrest the fall of the roof deck.