ASP EXTRA GIVES INSTALLERS GREATER FLEXIBILITY AS THE HEIGHT RANGE PER UNIT IS FAR GREATER. THEY EVEN HAVE THE HEIGHT MARKED ON THE SIDE OF THE STEMS

ww1A further development is the ASP EXTRA support pedestal.

This range of pedestals has been designed to give applicators much greater scope to pave on areas with very large differences in deck level. Often contractors are not sure exactly by how much and where the fall on the roof will be exactly, and it can be frustrating when a slightly incorrect height of ASP unit has been purchased.

These pedestals have the heights marked out every 10mm on the side of stems, so users can see at a glance the exact height they are adjusting to without having to constantly re-measure.

Each ASP EXTRA pad comes complete with an extension shank. This shank clicks into the baseplate and the threaded stem is placed into the top of it.

By using the ASP EXTRA range contractors can set out paving across a huge height range from 85mm right up to 380mm by ordering only three different sized units. This makes estimating much easier and avoids delays in exchanging stock.

ASP EXTRA - 85-135mm

ASP EXTRA – 85-135mm

ASP EXTRA – 125-215mm

ASP EXTRA – 125-215mm

ASP EXTRA – 210-380mm

ASP EXTRA – 210-380mm

TD EXTRA pedestals are also available for supporting timber joists when constructing timber decking.  All ASP EXTRA support pedestals can have slope correctors fitted to their bases, and can be used with standard bases or the mini-base 150mm diameter base plates.

EXTRA height pedestals are also available for timber decking. TD EXTRA supports allow the same amount of flexibility and freedom to installers of decking systems if they are unsure of exactly where the deck falls and by how much.

Technical Data
CODE

HEIGHT

DIAMETER OF HEAD

DIAMETER OF BASE

LUG WIDTH

LUG HEIGHT

WEIGHT TOLERANCE

TEMPERATURE TOLERANCE

ASP EXT 085

85-135mm

120mm

200mm

2.2mm, 4mm, 6mm or 10mm

18.5mm or 10mm

400kg

-40°C to +75°C

ASP EXT 125

125-210mm

120mm

200mm

2.2mm, 4mm, 6mm or 10mm

18.5mm or 10mm

400kg

-40°C to +75°C

ASP EXT 210

210-380mm

120mm

200mm

2.2mm, 4mm, 6mm or 10mm

18.5mm or 10mm

400kg

-40°C to +75°C

 

And for timber decking the EXTRA range technical data is as follows:

CODE

HEIGHT

DIAMETER OF HEAD

DIAMETER OF BASE

DISTNANCE BETWEEN LUGS

SIDE LUG HEIGHT

WEIGHT TOLERANCE

TEMPERATURE TOLERANCE

TD EXT 085

85-135mm

120mm

200mm

60mm

16mm

400kg

-40°C to +75°C

TD EXT 125

125-210mm

120mm

200mm

60mm

16mm

400kg

-40°C to +75°C

TD EXT 210

210-380mm

120mm

200mm

60mm

16mm

400kg

-40°C to +75°C

 

TD PLUS — EXTRA range:

CODE

HEIGHT

DIAMETER OF HEAD

DIAMETER OF BASE

NO. SCRES HOLES IN SIDE BAR

SIDE BAR HEIGHT

WEIGHT TOLERANCE

TEMPERATURE TOLERANCE

TD PLUS EXT 085

85-135mm

120mm

200mm

2

30mm

400kg

-40°C to +75°C

TD PLUS EXT 125

125-210mm

120mm

200mm

2

30mm

400kg

-40°C to +75°C

TD PLUS EXT 210

210-380mm

120mm

200mm

2

30mm

400kg

-40°C to +75°C

 

Slope correctors can also be added to all EXTRA range supports:

CODE

OUTER DIAMETER

INNER DIAMETER

PERCENATE SLOPE

DEGREE OF SLOPE

WEIGHT TOLERANCE

SLOPE 1

200mm

82mm

1%

0.57°

800kg

SLOPE 2

200mm

82mm

2%

1.11°

800kg

SLOPE 3

200mm

82mm

3%

1.71°

800kg