1. What is the M-Tray® Wildflower modular green roof system?
M-Tray® Wildflower is a pre-grown modular green roof system containing a combination of sedum and carefully selected wildflower species.
The plants are established within specially designed 500mm x 500mm modules containing an engineered, lightweight and free-draining growing substrate. The trays simply connect together during installation to form a continuous living roof.
Combining established vegetation, growing medium, water retention and drainage within one modular system makes installation straightforward while providing an attractive and biodiverse green roof from the outset.
2. How is M-Tray® Wildflower different from the standard Sedum M-Tray®?
The main difference is the vegetation.
The standard M-Tray® uses a mixture of established sedum species, while M-Tray® Wildflower combines sedum ground cover with a selection of low-growing wildflower species.
The sedum provides reliable coverage and year-round greenery, while the wildflowers introduce greater variety in colour, height and flowering periods. The two types of vegetation have been selected to complement one another, creating an attractive roof that also provides additional opportunities for biodiversity.
3. What types of projects are M-Tray® Wildflower suitable for?
M-Tray® Wildflower can be used on a wide range of domestic, commercial and public-sector green roof projects, including:
- Residential extensions
- Garden rooms and outbuildings
- Garages
- Flat roofs
- Podium decks
- Offices and commercial buildings
- Schools and educational buildings
- Hotels and leisure developments
- Care facilities
- Urban regeneration and biodiversity projects
The modular design is particularly useful where access is restricted, as individual trays can be transported and handled far more easily than large quantities of loose growing medium and vegetation.
The supporting structure, waterproofing, drainage arrangements and overall roof design must be suitable for the completed green roof build-up.
4. How can M-Tray® Wildflower help improve biodiversity?
The combination of sedum and wildflowers has been specifically developed to create a more diverse planted environment on the roof.
The wildflower selection includes hardy flowering species that can provide nectar, pollen and habitat opportunities for bees, butterflies and other insects. Increasing the variety of plant species can, in turn, help support a wider range of urban wildlife.
This makes M-Tray® Wildflower particularly suitable for projects where biodiversity and urban greening form an important part of the landscape or sustainability strategy.
5. What types of wildflowers are used in M-Tray® Wildflower?
The wildflower mix has been selected around species that are suited to the conditions found on an extensive green roof.
The mix contains low-growing, hardy species that are native to the UK or northern Europe and capable of growing in relatively low-nutrient substrates. Species are selected for their suitability to exposed rooftop conditions as well as their biodiversity benefits.
Examples within the published wildflower selection include thrift, wild strawberry, kidney vetch, thyme, bird’s-foot trefoil, wild marjoram, cowslip and selfheal, alongside sedum species that provide underlying vegetation coverage.
The exact appearance and balance of species can naturally vary as the plants develop.
6. Will a Wildflower M-Tray® look the same throughout the year?
No, and the seasonal variation is an intentional part of creating a living wildflower roof.
Different species grow and flower at different times, so the colour, height and density of the vegetation will naturally change through the seasons. Growth is generally at its strongest during spring and summer, while flowers and stems may die back during autumn and winter.
Some sedum species can also develop rusty red or brown colours during colder periods before producing stronger new growth in spring.
These seasonal changes create a more natural appearance and allow the roof to evolve throughout the year rather than looking identical in every season.
7. Does M-Tray® Wildflower provide complete vegetation coverage immediately?
M-Tray® modules are grown for several months before delivery and are supplied with a minimum of 90% vegetation coverage.
The sedum within the Wildflower M-Tray® provides an established base layer, while the wildflower species develop and flower according to their individual growing cycles and the prevailing conditions.
Wildflowers naturally take longer to establish and flower than sedum, and individual species may perform differently from one year to another depending on factors such as temperature, rainfall and sunlight. This natural variation is part of the character of a wildflower green roof.
8. What size are the M-Tray® Wildflower modules?
Each module measures 500mm x 500mm x 100mm deep.
Four trays are required to cover one square metre.
The module dimensions have been specifically designed to provide a substantial growing depth while remaining manageable for transportation and installation. Integrated hand grips beneath the tray make individual modules easier for installers to handle.
Their relatively compact size is particularly useful on projects with difficult access, including extensions and completed buildings where materials may need to be carried through restricted areas.
9. How much does an M-Tray® Wildflower green roof weigh?
The published saturated weight of the M-Tray® system is approximately 100kg per square metre.
Because the system becomes considerably heavier when the growing medium is holding water, structural capacity should always be considered using the appropriate loaded condition rather than the dry weight alone.
A suitably qualified structural engineer should confirm that the roof can accommodate the complete green roof build-up together with any other applicable loads before installation.
10. How does the M-Tray® Wildflower system manage rainwater?
The M-Tray® has been deliberately designed to balance water retention with effective drainage.
Each module contains 25 internal drainage reservoirs and eight drainage holes. The reservoirs hold a proportion of rainfall within the tray, giving the plants access to stored moisture, while excess water can drain through the module and continue towards the roof drainage system below.
The design helps retain rainwater for longer and delays some of the immediate discharge into roof outlets while ensuring that excess water can escape effectively.
11. Can M-Tray® Wildflower be installed on a sloping roof?
Yes. M-Tray® can be installed on level roofs and on slopes of up to 15 degrees. However, for pitches above 10 degrees, additional batten supports are recommended.
Slope, drainage, wind exposure and perimeter detailing should all be considered when designing the installation, so projects approaching the upper slope limit should be reviewed carefully before the trays are installed.
12. Does M-Tray® Wildflower need an irrigation system?
The requirement for irrigation will depend on the project, location, exposure and weather conditions.
An irrigation system is recommended for commercial green roofs, where reliable and consistent watering is particularly important.
For smaller residential projects, manual watering can be suitable provided the roof is monitored. If there has been no rain for around two weeks, the vegetation should be watered, with additional attention during prolonged periods of hot or dry weather.
Like all living planting schemes, providing adequate water when required will help maintain healthy growth and maximise flowering performance.
13. How much maintenance does an M-Tray® Wildflower roof require?
M-Tray® Wildflower is designed to be relatively straightforward to maintain, but a wildflower roof requires more maintenance than a sedum-only roof.
Maintenance is generally recommended two to four times each year, depending on the location and surrounding environment. Roofs close to trees or areas with significant bird activity may require additional attention because of increased leaves, debris or unwanted grass growth.
Maintenance typically includes:
- Removing weeds and invasive grasses
- Clearing leaves and dead organic matter
- Checking drainage outlets
- Removing excessive dead wildflower stems
- Redistributing wildflower seed
- Applying suitable fertiliser
- Checking irrigation where installed
- Watering during prolonged dry periods
The end of summer is particularly useful for lightly removing dead wildflower material and dispersing collected seeds back across the planted area to encourage future growth.
14. Can I walk on an M-Tray® Wildflower green roof?
M-Tray® modules are not designed to be used as a regular pedestrian surface.
They can tolerate careful foot access when essential maintenance or inspection work is being carried out, but repeated pedestrian traffic should be avoided to protect the vegetation.
Where people need to cross the roof regularly, dedicated access routes can be incorporated using suitable paving or decking. Combining planted areas with designated hard-landscaping routes helps protect the wildflowers while providing safe and convenient access around the roof.
15. What fire considerations apply to an M-Tray® Wildflower green roof?
The M-Tray® modular green roof system has achieved a BROOF(t4) external fire performance classification and has been tested in accordance with CEN/TS 1187 Test 4. The system also has an Extended Application Report in conformity with CEN/TS 16459:2019.
The growing medium is 100mm deep, contains less than 50% organic material and complies with BS 8616:2019.
Appropriate vegetation-free firebreaks are required around walls and rooftop features such as rooflights, drainage points and fall-arrest equipment in accordance with the project design and applicable requirements.
Wildflowers can naturally produce taller vegetation and dead stems as they complete their flowering cycle. Regular maintenance and removal of excess dead organic material are therefore particularly important on a wildflower roof, helping maintain the planting and manage the build-up of dry vegetation.
The complete installed roof system should always comply with the project fire strategy and applicable building requirements.
Please Note – UK Building Regulations (Approved Document B) assume freedom from fire spread on extensive green roofs if the substrate depth is at least 80mm with under 50% organic content. Going thinner may compromise regulatory fire safety assumptions.
Information correct as at the current date (18th November, 2026)
