Order / Enquire Now

    To order a product or to ask us a question, speak to our team on 0208 916 2222 or use the live chat facility in the corner of your screen. Alternatively, fill in the simple form below and we will endeavour to respond within 48 hours

    • Please see the Website terms & Conditions at the bottom of the homepage

    Pedestal FAQ’s

    Mega Balance

    1. What types of projects are Mega Balance pedestals suitable for?

    Mega Balance pedestals are designed for suspended paving, decking and aluminium rail systems.

    They are suitable for a wide range of commercial and residential applications, including flat roofs, podium decks, balconies, terraces, walkways and landscaped areas.

    The system is particularly useful on projects requiring a durable suspended surface that can accommodate drainage falls, services and varying build-up heights.

    Project-specific loading, waterproofing, fire and perimeter requirements should always be considered during the specification process.

    2. Can Mega Balance support paving, decking and aluminium substructures?

    Yes. The universal headpiece allows Mega Balance pedestals to support loose-laid paving slabs, timber or composite decking joists and compatible aluminium rail systems.

    This makes the range suitable for projects incorporating different surface finishes or areas where paving and decking are installed within the same development.

    Using one adaptable pedestal system can also help simplify design, specification and procurement.

    3. Which paving slabs and tiles can be used with Mega Balance pedestals?

    Mega Balance pedestals are designed to support suitable loose-laid paving slabs and tiles.

    The paving units sit on the pedestal headpiece and are positioned between the four integrated spacer tabs.

    The suitability of a particular slab will depend on factors including:

    • Slab dimensions
    • Slab thickness
    • Material strength
    • Anticipated loading
    • Pedestal spacing
    • The overall project layout

    The paving manufacturer’s recommendations should always be checked before installation. Project-specific pedestal layouts can also be prepared where required.

    4. Can Mega Balance pedestals be used with timber and composite decking?

    Yes. Mega Balance pedestals can support both timber and composite decking systems.

    Timber, composite or aluminium joists can be positioned on the pedestal headpiece between the integrated lugs. The anti-shock shim helps grip the joist and can reduce vibration and noise transfer through the completed system.

    Joists will not normally need to be mechanically fixed directly to the pedestal. Instead, the joists should be securely cross-fixed to form a stable supporting framework before the decking boards are installed.

    5. Which aluminium rails are compatible with Mega Balance?

    The universal headpiece is designed to connect directly with Wallbarn Box Rails and I-Plus aluminium rails.

    The rails click into the headpiece to create a secure substructure for paving or decking.

    Compatible rail options include:

    • 15mm, 20mm and 25mm Box Rails
    • 50mm, 75mm and 100mm I-Plus Rails

    Compatibility with third-party aluminium rail systems should be confirmed before specification or installation.

    6. What height range can Mega Balance pedestals accommodate?

    The Mega Balance range can create finished pedestal heights from 25mm to 1,025mm.

    Mini Mega Balance configurations are available for lower build-up heights between 25mm and 75mm.

    Larger heights can be achieved using compatible components, including:

    • 12.5mm Half Domes
    • 25mm Domes
    • 100mm Towers

    A maximum of three Dome or Half Dome extenders should be used on any single pedestal.

    The 100mm Tower is used with the 125–225mm pedestal assembly to create the highest configurations within the range.

    7. How much substrate fall can the self-levelling headpiece correct?

    The self-levelling headpiece can compensate for gradients of up to 5%. This is equivalent to a 1-in-20 fall or approximately 2.86 degrees.

    The system is designed for predominantly flat roofs and decks incorporating a suitable fall for drainage.

    Where the substrate gradient exceeds 5%, or where the fall changes significantly across the installation area, the proposed build-up should be reviewed before installation.

    8. How does the system allow water to drain between paving slabs?

    Four integrated positioning lugs create a consistent 4mm open joint between adjacent paving slabs or tiles.

    These joints allow rainwater to pass through the finished paving surface and drain onto the waterproofed deck below.

    The self-levelling headpiece enables the upper paving surface to remain level while the structural deck retains its required drainage fall.

    The cavity below the paving and all drainage outlets must be kept free from obstructions.

    9. Do Mega Balance pedestals need to be mechanically fixed to the structural deck?

    Mega Balance pedestals are normally installed as a loose-laid system without adhesive or mechanical fixings.

    This helps keep the pedestal system separate from the main structure and reduces the need to penetrate the waterproofing layer.

    Fixing holes are moulded into the baseplate where mechanical restraint is required.

    Any proposed fixing method must be agreed as part of the project design and must not compromise the waterproofing membrane or its seals.

    10. Can Mega Balance pedestals be installed over a waterproofing membrane?

    Yes. Mega Balance pedestals can be installed above suitable waterproofed roofs and decks.

    The supporting structure must be capable of carrying the full weight of the completed system, including:

    • Pedestals
    • Paving or decking
    • Rails or joists
    • Furniture and equipment
    • Anticipated pedestrian or imposed loads

    A suitable protection layer should be installed where necessary to prevent abrasion, puncturing or concentrated loading of the waterproofing membrane.

    The complete build-up should be approved by the waterproofing system manufacturer and project designer.

    11. Can the pedestal height be adjusted after the paving has been installed?

    Yes. Minor height adjustments can be made while the paving remains in position using the stainless-steel adjustment key.

    The key is inserted through the 4mm joint between the paving slabs and engages with the pedestal mechanism below.

    This allows individual slabs to be raised or lowered to correct rocking, dipping or minor surface irregularities without repeatedly lifting heavy paving units.

    12. How are perimeter slabs, cut pieces and small paving units supported?

    The self-levelling headpiece can be converted into a fixed head by inserting the Grey Nut into the centre of the pedestal.

    This locks the tilting mechanism and can provide additional stability beneath perimeter slabs, cut pieces and smaller paving units.

    The Border Shield can also be connected to the Mega Balance headpiece to provide anti-tipping support around exposed edges.

    The most appropriate perimeter detail will depend on the slab dimensions, paving layout and site conditions.

    13. Can Pedestals be installed up to walls, balustrades and perimeters, fascias & steps?

    13 Can Pedestals be installed up to walls, balustrades and perimeters, fascias & steps?

    Yes, in a number of ways:

    For walls and balustrades:

    1. Border Shield

    Border Shield is by far the best option for when paving up to walls and balustrades. Border Shield is a 50cm long plate made from injection moulded polypropylene which is designed to click securely onto the headpiece of Mega Balance.

    The positioning lugs on the Mega Balance should be set at a “St Andrew’s Cross” shape (45° angle) when looking down at the headpiece. This will enable the lugs to click into the profiled underside of the plate.

    There are a series of holes along the length of Border Shield so the pedestal can be placed at any point along the plate. It is recommended that a Mega Balance pedestal is placed under each end, however, to assure strength at the joints.

    It is important to insert the Grey Nut into the centre of the headpiece of the Mega Balance to lock the headpiece (take out the self-levelling mechanism) so that the finished paving system at these edges is secure and does not move.

    Each Border Shield plate has a series of stepped, projecting sections and cut out shapes which connect together in a dovetail mechanism, so each individual plate clicks together with the next plate to create a solid line platform 18 cm wide plate. This platform then butts right up to the wall or balustrade. This means the tile or slab is fully supported up to the wall / balustrade so the risk of those tiles or slabs tipping or moving is eliminated. The height of the Border Shield plate is 2 cm so always consider that this will increase the height of the paving system accordingly.

    There is a serrated bar which is supplied connected to one side of Border Shield and acts as a prop up against the wall to lock the height. This is snapped off the plate and used to lock the height once the required level is achieved. Slide the bar into the square shaped holes and drop down to the subsurface taking care to ensure it sits onto the top surface of the baseplate. Once the height needed is measured, make a mark on the bar, remove it from the hole and cut the bar at this point. The bar is long enough to be able to cut a number of shortened bars to act as props for the system. Push the bar back into position and twist it so that the serrations grasp the side of the square hole to fix into place and not move.

    Once the series of plates are installed a solid false floor / raft up against the wall is created to support tiles or slabs.

    An additional top spacer / rubber lug holder is provided by Wallbarn to sit on top of the Border Shield plate to position and separate the tiles / slabs. These spacers can be easily cut into halves or quarters and any number of the lugs for corners, small cuts of tiles and other irregular shapes.

    Border Shield is by far the most secure and stable way to support tiles / slabs at these often vulnerable and high trafficked areas, so should always be considered for public areas or high end projects.

    1. Stainless steel edging plates

    This straight bar with a bull nose profile one side is made from stainless steel and is designed to sit on top of the headpiece and hook over the lugs to sit in place. Installers need to remove two of the lugs on the headpiece form the headpiece of the Mega Balance pedestal immediately up against the wall so that two tiles (rather than four) sit on that pedestal head.

    If installers wish to, they can cut the baseplates of the Mega Balance pedestals back so that there is no overhang of the tiles / slabs. There are a series of cut marks on the underside of the baseplates to guide where to cut the baseplates back.

    1. Plastic edging plates

    This straight bar with a bull nose profile one side is made from injection moulded polypropylene and is designed to sit on top of the headpiece and hook over the lugs to sit in place. Installers need to remove two of the lugs on the headpiece form the headpiece of the Mega Balance pedestal immediately up against the wall so that two tiles (rather than four) sit on that pedestal head.

    If installers wish to, they can cut the baseplates of the Mega Balance pedestals back so that there is no overhang of the tiles / slabs. There are a series of cut marks on the underside of the baseplates to guide where to cut the baseplates back.

     

    For open sided perimeters, edges, fascias and steps:

    1. Perimeter Edge Plate

    This is a 2 part kit using identical upper and lower plates. The upper plate clicks securely onto the top of the Mega Balance pedestal headpiece, while the lower plate fixes beneath the pedestal baseplate.

    The Perimeter Edging Plate Kit enables porcelain tiles and vertical risers to be bonded at exposed edges and corners, providing a clean, stable finish on terraces, balconies and podium decks.

    It is particularly useful for fascias, steps and vertical sections beneath the tiles / slabs up to glass balustrades.

    Once installed together, the plates create a stable edge detail that significantly reduces movement and improves support at the perimeter.

    The 2 polypropylene plates installed above and below the pedestal have holes within them to allow adhesive to pass through, so the tiles or slabs can be bonded to the plates to secure the edges.

    There are side lugs / ribs / echelons / eyelashes on each plate where adhesive can also be applied to bond the vertical sections of tile and form a secure upstand / step / fascia / finish detail. form a strong mechanical bond. This ensures perimeter tiles remain fixed while maintaining

    The Perimeter Edging Plate Kit helps installers to achieve stronger, more durable, cleaner perimeter detailing; improved long-term performance and a professional finish

    14. Are Mega Balance pedestals suitable for projects requiring a non-combustible or Class A system?

    Mega Balance polypropylene pedestals are classified as Euroclass E under EN 13501-1.

    They should not be specified as Class A or non-combustible pedestals.

    Their suitability will depend on the fire strategy, building height, installation location and regulatory requirements applying to the individual project.

    Where a fire-rated or non-combustible support system is required, an appropriately classified alternative pedestal system should be specified.

    The stainless-steel adjustment key has a separate Euroclass A classification, but this does not change the classification of the polypropylene pedestal.

    15. What inspection and maintenance does a Mega Balance installation require?

    The joints between paving slabs or decking boards should be kept clear to maintain effective drainage.

    The cavity between the structural deck and the finished surface should be inspected at least once a year.

    During inspection:

    • Drainage outlets should be checked and cleared
    • Leaves and debris should be removed
    • Combustible material should not be allowed to accumulate
    • Any movement or instability in the finished surface should be investigated

    Small amounts of loose debris may be removed carefully using water, provided roof outlets are not blocked or damaged.
    Where debris has become compacted, sections of paving or decking may need to be temporarily lifted to provide access to the cavity below.

    Information correct as at the current date (11th November, 2026)

    Wallbarn