Class A Rail Substructure System
- What is the Class A Rail Substructure System?
The Class A Rail Substructure System is a full-metal supporting framework designed for raised paving and decking installations where non-combustible construction is required.
It combines MetalPad EX adjustable pedestals with high-grade aluminium Box Rails or I-Plus Rails, together with purpose-designed metal headpieces, brackets, connectors and fixings.
The components have been designed to work together as an integrated system, creating a strong, adjustable platform beneath the finished paving or decking while avoiding plastic or rubber gaskets within the Class A substructure.
Full system information is available in the Class A Rail System technical datasheet.
- What types of projects is the Class A Rail Substructure System suitable for?
The system is designed for raised external surfaces where fire performance, structural stability and long-term durability are important.
Typical applications include:
- Balconies
- Roof terraces
- Flat roofs
- Podium decks
- High-rise developments
- Multi-storey residential buildings
- Commercial developments
- Communal amenity areas
- Refurbishment and retrofit projects
- Raised paving and decking installations
It is particularly useful on projects where combustible supporting materials need to be replaced or avoided.
The Fire-Rated Paving & Decking Systems brochure provides further information on applications in high-rise and regulated environments.
- Why is the system made entirely from metal components?
Using metal throughout the supporting structure allows the system to meet the requirements of projects where combustible pedestal, rail and fixing components are unsuitable.
The main structure uses steel MetalPad EX pedestals and high-grade aluminium rails, while compatible brackets, headpieces, clips and fixing components are also manufactured from metal.
This has been deliberately designed to remove the need for plastic or rubber gaskets within the Class A substructure while still providing the adjustment, drainage and installation flexibility required for modern raised terraces and balconies.
- Can the same Class A substructure be used for both paving and decking?
Yes. The system has been designed specifically to support both paving and decking installations.
For paving, adjustable metal paving headpieces can be positioned along the aluminium rails to support tiles or slabs and maintain the required drainage gaps.
For decking, boards are mechanically fixed to the aluminium joists using compatible Class A fixing systems such as the W Clip 60.
This makes the system particularly useful on projects containing different surface finishes because the same underlying rail principle can be adapted to suit the required finish.
- What fire classification applies to the Class A Rail Substructure System?
The system has been developed specifically for Class A applications and for projects where non-combustible materials form part of the fire strategy.
The product page identifies the overall substructure as Class A and states that the rail system meets BS EN ISO 1716:2018, with published A2-s1,d0 certification for relevant rail components.
Because different elements within a complete paving or decking build-up can carry their own individual classifications, the fire performance of the rails, pedestals, decking or paving and fixing components should each be checked against the project specification.
Current statutory fire-safety guidance for England can be found in Approved Document B on GOV.UK.
- How do the MetalPad EX pedestals connect to the aluminium rails?
The MetalPad EX pedestal has been specifically designed to connect securely to the aluminium rail system.
The rail or joist is mechanically attached to the pedestal using the M8 Wing Nut fixing system. The connection can initially be left slightly loose so the framework can be aligned accurately before the fixings are fully tightened.
This makes it easier to create a straight, level substructure while retaining the strength and security of a mechanical metal-to-metal connection once installation is complete.
- What aluminium rail sizes are available?
The Class A system uses two main types of aluminium rail.
Box Rails are available in:
- 15mm
- 20mm
- 25mm
I-Plus Rails are available in:
- 50mm
- 75mm
- 100mm
All are manufactured from high-grade 6063 T6 extruded aluminium.
The lower-profile Box Rails are particularly useful where available threshold height is restricted, while the deeper I-Plus Rails provide greater spanning capability and are particularly useful where larger build-up heights are required.
- How far can the aluminium rails span between pedestals?
The recommended maximum distance between supporting pedestals depends on the rail depth.
Published recommended maximum distances are:
- 15mm rail – 500mm
- 20mm rail – 625mm
- 25mm rail – 625mm
- 50mm rail – 600mm
- 75mm rail – 1,200mm
- 100mm rail – 1,800mm
The product page also publishes higher maximum deflection spans for certain rails, including up to 2,200mm for the 100mm rail. For specification purposes, the recommended maximum distances provide the more conservative design reference.
Rail performance has been independently tested, and the official STS proof load test certificate is available for review.
- How low can the Class A substructure be installed?
The system has been designed to work even where available threshold height is limited.
A standard MetalPad EX and rail arrangement can create a substructure from approximately 41mm high.
For particularly restricted installations, the Box Rail can be combined with Ultra-Low Joist Holders to create a total substructure height from approximately 17mm.
This makes the system particularly valuable on refurbishment and retrofit projects where existing doors, thresholds or surrounding levels cannot easily be altered.
- Can the system accommodate very large build-up heights?
Yes. The Class A system has also been designed for projects requiring much greater finished heights.
A Rail-to-Rail Headpiece allows one aluminium rail to be supported perpendicular to another, creating multi-level frameworks where necessary.
This makes it possible to construct substantially taller substructures while retaining a mechanically connected metal framework.
The arrangement can be especially useful on refurbishment projects where large voids, existing structural elements or substantial changes in level need to be accommodated beneath the finished terrace.
- How are paving slabs supported on the rail system?
Purpose-designed paving headpieces can be positioned anywhere along the aluminium rail.
This allows the support positions to be matched accurately to the paving layout rather than being restricted to the pedestal locations beneath.
The headpieces support the corners or edges of the paving units and incorporate positioning lugs to maintain consistent open joints for drainage.
Connecting the paving supports through the aluminium rail framework also provides additional lateral strength across the deck and helps reduce rocking or movement between individual slabs. Independent testing has been carried out on the rail-and-pedestal arrangement to verify its structural performance.
- How are paving slabs supported close to walls and parapets?
The Metal Edge Plate has been developed specifically for perimeter areas.
It provides additional support where paving meets walls or parapets while maintaining an appropriate drainage gap between the edge of the paving and the vertical surface.
This helps installers create neat perimeter details without pushing the paving directly against the building fabric and allows rainwater to continue draining through the suspended surface.
Purpose-designed perimeter components are particularly useful where cut slabs or restricted pedestal positions make conventional support more difficult.
- How are the aluminium rails connected together?
Straight and right-angle brackets are available to form the rail framework.
Two fixing methods can be used.
Self-tapping screws can provide a direct mechanical connection through the purpose-designed bracket holes.
Alternatively, an M8 bolt and wing nut arrangement allows the framework to be assembled loosely at first. This gives installers the opportunity to adjust the alignment before tightening all connections once the final position has been established.
The complete range can be viewed within the Class A connectors and fixings.
- Can the system be installed over insulation or waterproofing membranes?
Yes, provided the underlying roof build-up is suitable for the proposed loads.
The standard MetalPad EX pedestal has a 100mm diameter base for firm supporting surfaces such as concrete.
Where the pedestal is installed over more vulnerable surfaces such as insulation or waterproofing, a dedicated Spreader Plate can be positioned beneath it.
The Spreader Plate increases the supporting diameter to 185mm and has a smooth underside. Its larger footprint distributes loading across a wider area, helping reduce concentrated point loading on the substrate beneath.
The compressive strength and compatibility of the waterproofing or insulation should still be confirmed as part of the project design.
- Has the Class A Rail Substructure System been independently tested, and what maintenance is required?
Yes. Structural proof-load testing has been carried out independently by Specialist Technical Services (UK) Ltd on aluminium rails fitted to steel pedestals.
The testing examined different rail depths and spans, with loads recorded at a maximum permitted deflection of 5mm. The results support the published rail span guidance and can be reviewed in the independent STS test certificate.
Once installed, the substructure itself requires relatively little maintenance. Periodic inspections should focus on keeping the cavity beneath the paving or decking clear, checking drainage outlets and removing leaves or other debris. Any unexpected pooling of water should be investigated.
Where extra structural stability is required, additional noggins and brackets can be incorporated into the rail framework. Published guidance states that adding noggins can increase load tolerance by up to 40% while also tying the framework together more securely.
Full technical and maintenance guidance is available in the Class A Rail System Operations & Maintenance Manual.
