A further development is the ASP EXTRA support pedestal.
This range of pedestals has been designed to give applicators much greater scope to pave on areas with very large differences in deck level. Often contractors are not sure exactly by how much and where the fall on the roof will be exactly, and it can be frustrating when a slightly incorrect height of ASP unit has been purchased.
These pedestals have the heights marked out every 10mm on the side of stems, so users can see at a glance the exact height they are adjusting to without having to constantly re-measure.
Each ASP EXTRA pad comes complete with an extension shank. This shank clicks into the baseplate and the threaded stem is placed into the top of it.
By using the ASP EXTRA range contractors can set out paving across a huge height range from 85mm right up to 380mm by ordering only three different sized units. This makes estimating much easier and avoids delays in exchanging stock.
All ASP EXTRA support pedestals can have slope correctors fitted to their bases, and can be used with standard bases or the mini-base 150mm diameter base plates.
EXTRA height pedestals are also available for timber decking. TD EXTRA supports to allow the same amount of flexibility and freedom to installers of decking systems if they are unsure of exactly where the deck falls and by how much.
Technical Data
CODE
|
HEIGHT |
DIAMETER OF HEAD |
DIAMETER OF BASE |
LUG WIDTH |
LUG HEIGHT |
WEIGHT TOLERANCE |
TEMPERATURE TOLERANCE |
ASP EXT 085 |
85-135mm |
120mm |
200mm |
2.2mm, 4mm, 6mm or 10mm |
18.5mm or 10mm |
400kg |
-40ยฐC to +75ยฐC |
ASP EXT 125 |
125-210mm |
120mm |
200mm |
2.2mm, 4mm, 6mm or 10mm |
18.5mm or 10mm |
400kg |
-40ยฐC to +75ยฐC |
ASP EXT 210 |
210-380mm |
120mm |
200mm |
2.2mm, 4mm, 6mm or 10mm |
18.5mm or 10mm |
400kg |
-40ยฐC to +75ยฐC |
And for timber decking the EXTRA range technical data is as follows:
CODE
|
HEIGHT |
DIAMETER OF HEAD |
DIAMETER OF BASE |
DISTNANCE BETWEEN LUGS |
SIDE LUG HEIGHT |
WEIGHT TOLERANCE |
TEMPERATURE TOLERANCE |
TD EXT 085 |
85-135mm |
120mm |
200mm |
60mm |
16mm |
400kg |
-40ยฐC to +75ยฐC |
TD EXT 125 |
125-210mm |
120mm |
200mm |
60mm |
16mm |
400kg |
-40ยฐC to +75ยฐC |
TD EXT 210 |
210-380mm |
120mm |
200mm |
60mm |
16mm |
400kg |
-40ยฐC to +75ยฐC |
TD PLUS — EXTRA range:
CODE
|
HEIGHT |
DIAMETER OF HEAD |
DIAMETER OF BASE |
NO. SCRES HOLES IN SIDE BAR |
SIDE BAR HEIGHT |
WEIGHT TOLERANCE |
TEMPERATURE TOLERANCE |
TD PLUS EXT 085 |
85-135mm |
120mm |
200mm |
2 |
30mm |
400kg |
-40ยฐC to +75ยฐC |
TD PLUS EXT 125 |
125-210mm |
120mm |
200mm |
2 |
30mm |
400kg |
-40ยฐC to +75ยฐC |
TD PLUS EXT 210 |
210-380mm |
120mm |
200mm |
2 |
30mm |
400kg |
-40ยฐC to +75ยฐC |
Slope correctors can also be added to all EXTRA range supports:
CODE
|
OUTER DIAMETER |
INNER DIAMETER |
PERCENATE SLOPE |
DEGREE OF SLOPE |
WEIGHT TOLERANCE |
SLOPE 1 |
200mm |
82mm |
1% |
0.57ยฐ |
800kg |
SLOPE 2 |
200mm |
82mm |
2% |
1.11ยฐ |
800kg |
SLOPE 3 |
200mm |
82mm |
3% |
1.71ยฐ |
800kg |