Order / Enquire Now

    To order a product or to ask us a question, speak to our team on 0208 916 2222 or use the live chat facility in the corner of your screen. Alternatively, fill in the simple form below and we will endeavour to respond within 48 hours

    • Please see the Website terms & Conditions at the bottom of the homepage

    Anchors & fixings for hammer fitting

    FOR INSULATION BOARDS, & SHEET MEMBRANES

    Anchors & fixings for hammer fitting

    Wallbarn offers a number of fixings and anchors made from metal and from plastic suitable for a variety of uses. These robust and durable products are designed to help installers create solid fixings when applying sheet material to the horizontal or vertical surface. They are suitable for fixing insulation boards, ply and plastic sheet membranes to timber and masonry.

    fixing

    The Fixing & Anchor pins comprise a polypropylene sleeve or sheath with an integrated circular flange / washer around the top. There is a separate pin also made from plastic which is driven into the sheath to penetrate the structure.

    Wallbarn offers two ranges, the “D Plus range” and the “D H range“. Each range has different strength and anchoring specifications; which means different codes can be used for different applications. Users should review the technical data given below to be assured the product chosen matches and exceeds the anchoring strength and depth required for the project. 

    When fixing insulation boards to vertical plane it is recommended that a quantity of 8-12 pieces per mยฒ are installed.

    โ€œD Plusโ€ Range

    Fixings & AnchorsThis fixing is made from plastic and it is designed for hammering into the structure.

    The sleeve diameter is 10mm. This product is sold in full box quantities of 200 pieces per box (apart from the 220mm long nails, which contains 100 pieces per box).

    • Tension load in concrete (NRk, ETAG 014) 0.6kN, anchoring depth min. 50mm.
    • Tension load in solid brick (NRk, ETAG 014) 0.4kN, anchoring depth min. 50mm.
    • Tension load in hollow or perforated masonry (NRk, ETAG 014) 0.3kN, anchoring depth min. 50mm.

    CODE

    Description &  Sleeve Diameter / length of pin

    AF-DOWEL-THERM-DPLUS-10/070-Z Fixing Dowels THERMOMASTER D PLUS 10/70mm (box of 200)
    AF-DOWEL-THERM-DPLUS-10/090-Z Fixing Dowels THERMOMASTER D PLUS 10/90mm (box of 200)
    AF-DOWEL-THERM-DPLUS-10/120-Z Fixing Dowels THERMOMASTER D PLUS 10/120mm (box of 200)
    AF-DOWEL-THERM-DPLUS-10/140-Z Fixing Dowels THERMOMASTER D PLUS 10/140mm (box of 200)
    AF-DOWEL-THERM-DPLUS-10/160-Z Fixing Dowels THERMOMASTER D PLUS 10/160mm (box of 200)
    AF-DOWEL-THERM-DPLUS-10/180-Z Fixing Dowels THERMOMASTER D PLUS 10/180mm (box of 200)
    AF-DOWEL-THERM-DPLUS-10/200-Z Fixing Dowels THERMOMASTER D PLUS 10/200mm (box of 200)
    AF-DOWEL-THERM-DPLUS-10/220-Z Fixing Dowels THERMOMASTER D PLUS 10/220mm (box of 100)
    FOR INSULATION BOARDS & SHEET MEMBRANES
    โ€œD H RANGEโ€

    Anchors & fixings for hammer fittingThese fixings are made with a stainless steel pin and designed for installations where a far greater tension load is required. The sheath and sleeve is made from polymide plastic but the nail is rust-proof metal with an integrated polymide cap.

    The D H fixings is also designed to be hammered into the structure. The sleeve diameter 8mm. This D H Range is sold in full box quantities of 200 pieces per box.

    • Tension load in concrete (NRk, ETAG 014) 0.4kN, anchoring depth min. 40mm
    • Tension load in solid brick (NRk, ETAG 014) 0.4kN, anchoring depth min. 50mm

    CODE

    Description &  Sleeve Diameter / length of pin

    AF-DOWEL-THERM-DH-090-Z Fixing Dowels THERMOMASTER D-H 90mm (metal pin, 200 pieces)
    AF-DOWEL-THERM-DH-110-Z Fixing Dowels THERMOMASTER D-H 110mm (metal pin, 200 pieces)
    AF-DOWEL-THERM-DH-130-Z Fixing Dowels THERMOMASTER D-H 130mm (metal pin, 200 pieces)
    AF-DOWEL-THERM-DH-150-Z Fixing Dowels THERMOMASTER D-H 150mm (metal pin, 200 pieces)
    AF-DOWEL-THERM-DH-170-Z Fixing Dowels THERMOMASTER D-H 170mm (metal pin, 200 pieces)
    AF-DOWEL-THERM-DH-190-Z Fixing Dowels THERMOMASTER D-H 190mm (metal pin, 200 pieces)
    ACCESSORIES FOR THE D PLUS & D H RANGES

    Anchors & fixings for hammer fittingCap Fittings / Flange

    A cover piece is also available for use with all three ranges above, a simple cover cop with surrounding flange, to dress the fixing area if required.
    They are made from Impact Resistant Polypropylene and are sold in full boxes of 100 pieces.

    CODE

    Description &  Sleeve Diameter / length of pin

    AF-DOWEL-THERM-COVER-Z Fixing Dowels THERMOMASTER Cover / flange (box of 100)
    Wallbarn